Residential Electrical
New construction, renovations, rewires, lighting, and everything a finished home needs to work safely.
Built with precision.
Powered by confidence.
Specializing in new construction and refined renovations. Delivering reliable power solutions for the finest homes and businesses across Connecticut.
- Licensed & Insured
- Residential & Commercial
- Serving Connecticut
Who We Are
A Connecticut electrical contractor built on quality work
Radiance Electrical Solutions handles the electrical side of new construction, renovations, and service work for homeowners, builders, and business owners across Connecticut.
The crew is small on purpose. You deal with the same people from the first walkthrough to the final inspection, and the work gets built to a standard we’re happy to photograph.
- Credentials
- Licensed & insuredCT ELECTRICAL LICENSE: ELC.0211657-E1
- Work
- Residential & commercial
- Area
- Connecticut
What We Do
Our services
From standby generators and panel upgrades to full electrical packages on new builds.
Commercial Electrical
Fit-outs, equipment hookups, three-phase distribution, and service work scheduled around your operation.
Generator Installations
Whole-home and light commercial standby systems, from load calculation through commissioning.
- Service Upgrades
- EV Charging
- Lighting Installation
- Electrical Renovations
- Troubleshooting & Repairs
- New Construction
In Detail
What each service covers
Residential Electrical
From a single dead circuit to a full rewire — devices, dedicated appliance circuits, smoke and CO detection, exterior and landscape power, and panel surge protection. Finished surfaces get protected before anything opens up.
- Rewires
- Dedicated circuits
- Devices & fixtures
- Surge protection
Commercial Electrical
Tenant fit-outs, equipment hookups, three-phase distribution, and service work. We work off drawings, coordinate with GCs and building engineers, and schedule shutdowns around your operation.
- Fit-outs
- Three-phase
- Equipment hookups
- Off-hours shutdowns
Generator Installations
Whole-home and light commercial standby systems — load calculation, pad, generator set, automatic transfer switch, and the feeders between them. Gas and utility coordination, permits, and inspection handled, then the unit is commissioned and demonstrated.
- Load calculations
- Transfer switches
- Permits & inspection
- Commissioning
EV Charging
Level 2 home and workplace charging on a properly sized dedicated circuit. We confirm the existing service can carry the load before quoting, then run the circuit where you actually park. Hardwired or receptacle, indoor or outdoor rated.
- Level 2
- Load evaluation
- Hardwired or NEMA 14-50
- Garage & exterior
Panel Upgrades
Replacing a full, obsolete, or unsafe load center with a panel that has room to grow. Circuits are traced, transferred, and labeled in a directory the next person can actually read. AFCI/GFCI protection and whole-panel surge suppression added where required.
- Load centers
- Circuit tracing
- AFCI / GFCI
- Labeled directories
Service Upgrades
Increasing the incoming service — 100A to 200A, 200A to 400A, or a single meter to a multi-position bank. Utility application and coordination, mast or underground lateral, meter socket, grounding electrode system, and the inspection that has to pass before power is restored.
- 100A → 200A → 400A
- Utility coordination
- Meter banks
- Grounding & bonding
Lighting Installation
Interior, exterior, and landscape lighting laid out around how the space is actually used. Recessed layouts, decorative fixtures, under-cabinet and cove lighting, dimming and controls, plus LED retrofits that cut load and even out color across a room or a whole facility.
- Recessed layouts
- Dimming & controls
- LED retrofits
- Landscape
New Construction & Renovations
Full electrical packages on new builds, additions, kitchens, baths, basements, and gut renovations — rough-in through trim. We work off the plan set and coordinate with the GC and other trades so walls close on schedule. Mechanical and appliance hookups included: boilers, air handlers, mini-splits, well and sump equipment.
- Rough & finish
- GC coordination
- Mechanical hookups
- Inspection ready
Security Camera Systems
Camera and low-voltage installation with the cabling done right the first time — concealed runs, proper terminations, PoE switching, and a recorder location that stays accessible. Cameras are aimed and focused on site, and you leave knowing how to pull footage.
- PoE cameras
- Concealed cabling
- NVR setup
- Data & low voltage
Troubleshooting & Repairs
Tripping breakers, dead circuits, flickering lights, failed inspections, and equipment that won’t start. We diagnose with meters and a method rather than guesswork, explain what we found, and give you the option to repair now or plan the larger fix.
- Fault isolation
- Code corrections
- Controls & motors
- Inspection punch lists
Our Work
Recent projects
Real installations, photographed on site. Tap any photo to view it larger.
Shoreline Standby Generator
Whole-home standby unit set on a poured pad with a new automatic transfer switch, sized so the house runs normally through an outage.
400A Automatic Transfer Switch
Service-rated transfer switch installed and terminated with labeled, dressed conductors and conduit routed clear of the mechanical equipment.
Load Center & Service Disconnect
Full-size load center paired with an emergency service disconnect, roughed for a generator feed and left with a clean, readable circuit directory.
Multi-Unit Meter Bank
Six-position meter stack fed by underground laterals, with each run swept, supported, and labeled before backfill and utility connection.
Production Floor Lighting
Overhead lighting across an active manufacturing space, staged in sections so machining and assembly kept running through the work.
Commercial Equipment Power
Power and disconnect for exterior mechanical equipment, with conduit run tight to the structure and sealed at every penetration.
Control Cabinet Build-Out
Breakers, contactors, and control wiring landed on terminal blocks and numbered, so the next service call starts with a drawing instead of a guess.
Mechanical Room Wiring
Power and controls for a high-efficiency heating system — circulators, zone controls, and service receptacles run in conduit on a dedicated backboard.
Residential Standby Generator
Generator set on a new pad with the transfer switch and meter tied in alongside, then commissioned and exercise-tested before sign-off.
Why Radiance
What you get when you hire us
- Licensed and insured
Work performed to current code and local requirements, with permits pulled and inspections met.
- Reliable scheduling
Confirmed appointments, and a call from us the moment anything needs to move.
- Quality workmanship
Straight runs, correct terminations, and clean penetrations — the details that hold up years later.
- Clear communication
Itemized written quotes, plain explanations, and a call before anything changes the price.
- Attention to detail
Labeled circuits, level devices, tidy conduit, and a site left clean at the end of every day.
- Local service
Connecticut based, so the person who quoted your job is the person you can reach afterward.
Process
First call to final walkthrough
- 01Call or estimate request
Tell us what’s happening and where. For anything unsafe, we’ll tell you what to shut off before we arrive.
- 02Site visit and written estimate
We look at the existing service, panel capacity, and access, then price the work in writing with the scope itemized.
- 03Permits and scheduling
Permits pulled and utility coordination handled where the work requires it, with a date confirmed before we start.
- 04Installation
Surfaces protected, work performed to code, and the site cleaned at the end of every day — not just the last one.
- 05Inspection and walkthrough
We meet the inspector, label the panel, demonstrate the new equipment, and hand over documentation before we leave.
Equipment
Brands we work with
Trusted products from industry-leading manufacturers.
Get Started
Request an estimate
Tell us about the project and we’ll follow up with a written, itemized estimate.
Phone
(203) 848-5803
Email
anthony@radianceelectricalsolutions.com
Service area
Connecticut
Credentials
Licensed & insured
CT ELECTRICAL LICENSE: ELC.0211657-E1